In short
A garage door that won't close from the remote is most often a sensor problem, not a broken door. In Middletown, a technician checks the photo-eyes and wiring, resets the travel and force, and confirms the door reverses on contact before leaving. Don't bypass the sensors in the meantime.

Doors that won't close in Middletown
Middletown's bayshore sections, Belford, Port Monmouth and Leonardo, took flood water in Hurricane Sandy, and salt has been working on garage hardware there ever since. Sensors and their wiring corrode from the connections outward, so the lights drop out a little more often each year until they stop. Inland in Lincroft, Oak Hill and Chapel Hill, attached garages on wooded lots mostly see leaves, spider webs and the occasional bumped bracket. Along the Navesink, damp is the issue.
Why a garage door refuses to close
- Door starts down, then goes back up. Something is blocking, or seems to be blocking, the two safety sensors near the floor.
- Opener light blinks and the door stays open. The sensors have lost sight of each other: a bumped bracket, a dirty lens or a broken wire.
- Door closes only if you hold the wall button. That is the opener overriding its sensors. It tells you the sensors are the problem, and it is not a way to run the door day to day.
- Door closes, touches the floor and reopens. The travel or force setting is off, or the floor has heaved and the door thinks it hit something.
What you can safely try yourself
Clear the doorway, clean both sensor lenses, and check that the two sensors point at each other at the same height. A steady light on each side means they can see each other. If one keeps blinking after that, or the wires look damaged, leave it for the technician.
Never disconnect the sensors or move them up out of the doorway to get the door working. They are what stops the door from closing on a child, a pet or a car.
What the technician does
- Checks power and wiring to both sensors and repairs any break.
- Realigns the sensors, or replaces the pair if one has failed.
- Resets the open and close travel so the door seals without straining.
- Tests the automatic reverse on an object in the doorway and with the beam blocked.
Around Middletown
- River Plaza: Streets beside the Navesink across from Red Bank.
- Navesink and Locust: Estates and horse properties above the river.
See the full Middletown service area.